NSN 5305-01-194-7055
High Torque Screw
Hole at threaded end reamed for press fit with plug.
Manufacturer part number CA2193-3-14 for national stock number 5305011947055.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-7055.
-
MPN or Model
CA2193-3-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.425 inches and 0.465 inches -
Fastener Length
Between 1.310 inches and 1.330 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.335 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Width Across Flats
Between 0.1253 inches and 0.1270 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-102-5533 MPN CA1391-10-2-10Panel Screw Assembly
- 5305-01-286-2607 MPN CA28102-3-7HSPanel Screw Assembly
- 1560-00-030-5242 MPN 176-33852-1Main Shaft Assembly
- 1560-00-125-4205 MPN 77-13312-1La Bracket Assembly
- 1560-00-185-5669 MPN 151-53612Heat And Vent Connector
- 4920-01-172-0354 MPN R-TBD-615Flight Control System Test Set
- 5930-01-174-4832 MPN L5265010-007Switch Actuator Arm
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-7055 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-3-14 | Arconic Global Fasteners & Rings, |
LE111-0002-3014 | Boeing Company, The |
LE111-0002-3014 | Fastener Innovation Technology, Inc. |