NSN 5305-01-194-7056
High Torque Screw
Hole at threaded end reamed for press fit with plug.
Manufacturer part number CA2193-3-18 for national stock number 5305011947056.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-7056.
-
MPN or Model
CA2193-3-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.425 inches and 0.465 inches -
Fastener Length
Between 1.560 inches and 1.580 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.335 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Width Across Flats
Between 0.1253 inches and 0.1270 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-1261 MPN CA1376-6-2-8Machine Screw
- 5305-01-040-1105 MPN CA2410B-2-8HSPanel Screw Assembly
- 5305-01-046-8075 MPN CA30012-2LSocket Head Cap Screw
- 5305-01-283-2422 MPN CA21241C10-10-15Setscrew
- 5306-00-281-7728 MPN CA4510-4-62Close Tolerance Bolt
- 1560-00-246-6639 MPN 170-31026Aircraft Access Cover
- 1560-00-304-6681 MPN 191-48284-1Aircraft Fairing
- 1680-00-790-0919 MPN 265-220403-2Remote Control Lever
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-7056 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-3-18 | Arconic Global Fasteners & Rings, |
LE111-0002-3018 | Boeing Company, The |