NSN 5305-01-194-7059
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580V4R16 for national stock number 5305011947059.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-7059.
-
MPN or Model
NAS1580V4R16
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.388 inches and 1.418 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1680-01-479-6305 MPN NAS355-60-840Aircraft Control Tube Assembly
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 1560-01-623-0453 MPN 520-14944-5Aircraft Stringer
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-007-0287 MPN NAS1131C88PClose Tolerance Screw
- 5305-00-051-8606 MPN MS16995-94Socket Head Cap Screw
- 5305-00-116-1469 MPN MS21090-352Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-7059 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V4R16 | National Aerospace Standards |