NSN 5305-01-194-9196
High Torque Screw
Keyways on threads and shank spaced 120 deg apart.
Manufacturer part number CA2194-3-06 for national stock number 5305011949196.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-9196.
-
MPN or Model
CA2194-3-06
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.425 inches and 0.465 inches -
Fastener Length
Between 0.810 inches and 0.830 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.264 inches and 0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Width Across Flats
Between 0.1253 inches and 0.1270 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-842-1581 MPN CA2730-4-22Close Tolerance Screw
- 5305-01-449-6660 MPN CA2254-10-4Machine Screw
- 5305-01-519-2099 MPN CA2292-10-10-31Panel Screw Assembly
- 5306-01-004-0870 MPN CA4510-5-13Close Tolerance Bolt
- 1680-00-329-7406 MPN 165-54545-1Cable Assy And Plat
- 1560-00-797-5462 MPN 265-335555-2Uplock Arm Assembly
- 1560-00-888-4891 MPN 180-48501-401Aircraft Fuel Tank
- 1560-00-898-8088 MPN 265-318310-201Sliding Cockpit W Track Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-9196 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2194-3-06 | Arconic Global Fasteners & Rings, |
LE111-0003-3006 | Boeing Company, The |
LE111-0003-3006 | Fastener Innovation Technology, Inc. |