NSN 5305-01-195-5061
High Torque Screw
Between 2.488 inches and 2.518 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4D35 for national stock number 5305011955061.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-195-5061.
-
MPN or Model
HT4049-4D35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.340 inches -
Fastener Length
Between 2.488 inches and 2.518 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.365 inches first hole and 2.405 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-518-5287 MPN LS15262V06-10Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-462-2749 MPN 3M1169V6-20AClose Tolerance Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5306-00-075-3230 MPN MS21250-08060Shear Bolt
- 5306-00-149-1835 MPN VEP220555-12-38Machine Bolt
- 5306-00-819-3484 MPN 684018-18Machine Bolt
- 5306-00-903-8820 MPN VFK100G-08024Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-195-5061 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4D35 | Huck International, Inc. |
HT4049-4D35 | Arconic Global Fasteners & Rings, |
HT4049-4D35 | Fastener Innovation Technology, Inc. |
HT4049-4D35 | West Coast Aerospace Inc |
HT4049-4D35 | Sps Technologies Ltd Tj Brooks |
ST3M714-4D35 | Boeing Company, The |
11931-4D35 | Reid Products Inc. |
HT4049-4D35 | Alcoa Global Fasteners, Inc. |
HT4049-4D35 | Hi-shear Corporation |
HT4049-4D35 | Sps Technologies, Llc |
HT4049-4D35 | Lisi Aerospace Canada Corp |
HT4049-4D35 | Huck Intl Inc |
HT4049-4D35 | Sps Technologies, Llc |
ST3M714-4D35 | Valley-todeco, Inc. |
ST3M714-4D35 | Heartland Precision Fasteners, Inc. |
ST3M714-4D35 | Houston Precision Fasteners I, Lp |
HT4049-4D35 | Sps Technologies, Llc |
HT4049-4D35 | Sps Technologies, Llc |
ST3M714-4D35 | Fastener Innovation Technology, Inc. |
WC4049-4D35 | West Coast Aerospace Inc |