NSN 5305-01-195-9069
High Torque Screw
Hole at threaded end with dia reamed to accept plug.
Manufacturer part number CA21017-4-13 for national stock number 5305011959069.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-195-9069.
-
MPN or Model
CA21017-4-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.338 inches and 1.358 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Width Across Flats
Between 0.1565 inches and 0.1587 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-127-5346 MPN CA28017-9PPanel Screw Assembly
- 5305-01-367-2879 MPN CA28102-03-10SKMachine Screw
- 1680-00-470-8521 MPN 265-540041Relay Panel Cover
- 4920-00-601-0906 MPN E2192-71Aircraft Maintenance Fixture
- 1560-00-829-7015 MPN 265-170077-19Interconnector Assembly
- 1560-00-998-8321 MPN 4P2B13Cockpit Console Panel
- 1680-01-166-4140 MPN L5208009-003Bungee Rod End
- 4920-01-172-9302 MPN R-TBD-785Valve Test Chamber
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-195-9069 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21017-4-13 | Arconic Global Fasteners & Rings, |
LE111-0001-4013 | Boeing Company, The |