NSN 5305-01-196-3184
High Torque Screw
Between 0.543 inches and 0.573 inches fastener length, pan no. 2 head style, between 0.456 inches and 0.508 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS4604U3 for national stock number 5305011963184.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-196-3184.
-
MPN or Model
NAS4604U3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.543 inches and 0.573 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas4600 professional/industrial association standard
More from these suppliers
- 5940-01-354-9982 MPN NAS1063A12-1000Terminal Board Marker Strip
- 1680-01-417-3471 MPN NAS1103-34DWBolt Aircraft Hinge
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 1680-01-662-0850 MPN NAS1057W3B-047Spacer A378 Nrp
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-005-0629 MPN NAS1742C04R6Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-196-3184 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604U3 | National Aerospace Standards |