NSN 5305-01-196-5089
High Torque Screw
Between 3.048 inches and 3.068 inches fastener length, flat countersunk head style, between 0.605 inches and 0.625 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number SC1776-7-38 for national stock number 5305011965089.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-196-5089.
-
MPN or Model
SC1776-7-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
Between 3.048 inches and 3.068 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.605 inches and 0.625 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-331-4778 MPN 965812-309CMachine Screw
- 5305-00-969-4753 MPN AIC1351-009Socket Head Cap Screw
- 5305-01-012-2012 MPN AIC812-04-12Machine Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5305-01-435-3850 MPN BACB30LU7-35Close Tolerance Screw
- 5305-01-455-2055 MPN AIC1515-4-5Close Tolerance Screw
- 5305-01-462-2728 MPN TX1024D4-14-6AClose Tolerance Screw
- 5305-01-562-4589 MPN 120-225C4-08Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-196-5089 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1776-7-38 | Arconic Global Fasteners & Rings, |
121754-7-38 | Sps Technologies, Llc |
VT1696-7-38 | Alcoa Global Fasteners, Inc. |
C9535-7-38 | Lockheed Martin Corporation |
C9535-7-38 | Sps Technologies, Llc |
C9535-7-38 | Sps Technologies, Llc |
C9535-7-38 | Sps Technologies, Llc |
AIC9535-7-38 | Sps Technologies, Llc |
SC1776-7-38 | Arconic Global Fasteners & Rings, |
121754-7-38 | Sps Technologies, Llc |
VT1696-7-38 | Alcoa Global Fasteners, Inc. |
C9535-7-38 | Lockheed Martin Corporation |
C9535-7-38 | Sps Technologies, Llc |
C9535-7-38 | Sps Technologies, Llc |
C9535-7-38 | Sps Technologies, Llc |
AIC9535-7-38 | Sps Technologies, Llc |
SC1776-7-38 | Arconic Global Fasteners & Rings, |
VT1696-7-38 | Alcoa Global Fasteners, Inc. |
121754-7-38 | Sps Technologies, Llc |
C9535-7-38 | Lockheed Martin Corporation |
C9535-7-38 | Sps Technologies, Llc |
C9535-7-38 | Sps Technologies, Llc |
C9535-7-38 | Sps Technologies, Llc |
AIC9535-7-38 | Sps Technologies, Llc |