NSN 5305-01-196-6751
High Torque Screw
Between 0.507 inches and 0.537 inches fastener length, oval countersunk undercut head style, between 0.355 inches and 0.397 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0047-2402 for national stock number 5305011966751.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-196-6751.
-
MPN or Model
LD111-0047-2402
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 0.507 inches and 0.537 inches -
Head Style
Oval countersunk undercut -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-004-3793 MPN 2629-130008-11Aircraft Structural Panel
- 1560-00-030-5182 MPN 170-25009-52Aircraft Channel
- 4820-00-037-2951 MPN NA5-6310-3Fluid Pressure Regulating Valve
- 1560-00-675-4997 MPN 165-54128Resistor Panel Assy
- 1680-00-694-7978 MPN NA5-7907ALinear Electro-mechanical Actuator
- 1560-00-770-3332 MPN 202-681007-2Aircraft Structural Component Support
- 1560-00-962-8825 MPN 246-16530Aileron Hinge Link
- 4920-01-172-0133 MPN 13A90000-001Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-196-6751 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-2402 | Boeing Company, The |
LD111-0047-2402 | Boeing Company, The |
LD111-0047-2402 | Boeing Company, The |
LD111-0047-2402 | Boeing Company, The |