NSN 5305-01-196-8132
High Torque Screw
Between 0.632 inches and 0.662 inches fastener length, fillister countersunk head style, 0.397 inches head diameter, head height: 0.063 inches .
Manufacturer part number LD111-0047-0404 for national stock number 5305011968132.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-196-8132.
-
MPN or Model
LD111-0047-0404
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 0.632 inches and 0.662 inches -
Head Style
Fillister countersunk -
Head Diameter
0.397 inches -
Head Height
0.063 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-145-0904 MPN CVC241-3-7Machine Screw
- 5305-00-242-4813 MPN AIC812-02-3Machine Screw
- 5305-00-807-3928 MPN AIC4043-04-05Machine Screw
- 5305-00-959-0155 MPN NAS1101-4-18Machine Screw
- 5305-01-014-8484 MPN AIC811-04-18Socket Head Cap Screw
- 5305-01-054-4631 MPN BACB30LU2-1Close Tolerance Screw
- 5305-01-079-1351 MPN NAS1101E4-16Machine Screw
- 5305-01-148-7466 MPN BACB30LU6-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-196-8132 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0404 | Boeing Company, The |
LD111-0047-0404 | Sps Technologies, Llc |
LD111-0047-0404 | Arconic Global Fasteners & Rings, |
LD111-0047-0404 | Huck International, Inc. |
LD111-0047-0404 | Sps Technologies, Llc |
LD111-0047-0404 | Sonic Industries Inc. |
LD111-0047-0404 | Hi-shear Corporation |
LD111-0047-0404 | Sps Technologies, Llc |
LD111-0047-0404 | Lisi Aerospace Canada Corp |