NSN 5305-01-197-1380
High Torque Screw
Keyway along grip and threads.
Manufacturer part number CA2193-4-09 for national stock number 5305011971380.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-1380.
-
MPN or Model
CA2193-4-09
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.088 inches and 1.108 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.454 inches and 0.508 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN CA1170-04-9Externally Relieved Body Screw
- 5305-01-094-6060 MPN CA2658-4-97Close Tolerance Screw
- 5305-01-209-7208 MPN CA28102-3-8PPanel Screw Assembly
- 5305-01-521-8300 MPN CA2254-4-5Material Aircraft Screw
- 5306-01-183-4000 MPN CA4383Internally Relieved Body Bolt
- 1560-00-117-9855 MPN 36-52611Flap Push Pu Braket
- 1560-00-533-2094 MPN 36-31840-3Cockpit Handle
- 1560-00-795-5116 MPN 265-522020Torque Tube Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-1380 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-4-09 | Fastener Innovation Technology, Inc. |
CA2193-4-09 | Arconic Global Fasteners & Rings, |
LE111-0002-4009 | Boeing Company, The |