NSN 5305-01-197-1383
High Torque Screw
Internal drive ribbed.
Manufacturer part number E178-2305 for national stock number 5305011971383.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-1383.
-
MPN or Model
E178-2305
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-4897 MPN AIC454-08-3Socket Head Cap Screw
- 5305-00-165-8012 MPN AIC813-01-4Machine Screw
- 5305-00-775-5676 MPN BACB30LU3-17Machine Screw
- 5305-01-020-6894 MPN NAS1101E04-9Machine Screw
- 5305-01-054-4624 MPN C9535-7-21Close Tolerance Screw
- 5305-01-097-5842 MPN AIC10234H10-28Close Tolerance Screw
- 5305-01-177-0876 MPN LD111-0047-0408Close Tolerance Screw
- 5305-01-303-6352 MPN AIC939-3-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-1383 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
E178-2305 | Huck International, Inc. |
SC1786RE3-05 | Arconic Global Fasteners & Rings, |
PBF1382-2305 | Sps Technologies, Llc |
123179E3R05 | Sps Technologies, Llc |
LE111-0038-2305 | Sps Technologies, Llc |
LE111-0038-2305 | Sonic Industries Inc. |
LE111-0038-2305 | Boeing Company, The |
E178-2305 | Huck Intl Inc |