NSN 5305-01-197-2551
High Torque Screw
Between 2.390 inches and 2.437 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number NAS333CP23 for national stock number 5305011972551.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-2551.
-
MPN or Model
NAS333CP23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 2.390 inches and 2.437 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
38.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.267 inches first hole -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas333 professional/industrial association standard
More from these suppliers
- 5940-01-451-4891 MPN NAS1063A10-105BWTerminal Board Marker Strip
- 5940-01-511-8759 MPN NAS1063A20-20DTTerminal Board Marker Strip
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-008-5893 MPN NAS1102E08-8BMachine Screw
- 5305-00-068-0501 MPN MS90725-5Hexagon Head Cap Screw
- 5305-00-069-5571 MPN MS90725-83Hexagon Head Cap Screw
- 5305-00-082-1988 MPN NAS1351C5-36Socket Head Cap Screw
- 5305-00-127-0191 MPN MS27039DD0828Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-2551 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CP23 | National Aerospace Standards |