NSN 5305-01-197-5316
High Torque Screw
Between 1.417 inches and 1.447 inches fastener length, pan no. 2 head style, between 0.456 inches and 0.508 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS4604U17 for national stock number 5305011975316.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5316.
-
MPN or Model
NAS4604U17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 1.417 inches and 1.447 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas4600 professional/industrial association standard
More from these suppliers
- 5305-00-053-1112 MPN MS24621-9Tapping Screw
- 5305-00-167-3631 MPN AN525-416-8Machine Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
- 5305-00-225-7201 MPN MS24694A81Machine Screw
- 5305-00-269-4202 MPN MS24694S144Machine Screw
- 5305-00-467-0115 MPN NAS1351-6LE12PSocket Head Cap Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-680-5430 MPN NAS1403-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5316 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604U17 | National Aerospace Standards |