NSN 5305-01-197-5317
High Torque Screw
Between 1.480 inches and 1.510 inches fastener length, pan no. 2 head style, between 0.456 inches and 0.508 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS4604U18 for national stock number 5305011975317.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5317.
-
MPN or Model
NAS4604U18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 1.480 inches and 1.510 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas4600 professional/industrial association standard
More from these suppliers
- 5305-00-045-7600 MPN MS35198-61Machine Screw
- 5305-00-052-6887 MPN MS35198-48Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-150-3179 MPN MS24693C342Machine Screw
- 5305-00-150-3484 MPN NAS1190C3P12Socket Head Cap Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
- 5305-00-323-3543 MPN NAS1742-06R7Socket Head Cap Screw
- 5305-00-395-4253 MPN NAS662C2R20Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5317 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604U18 | National Aerospace Standards |