NSN 5305-01-197-5323
High Torque Screw
Between 2.043 inches and 2.073 inches fastener length, pan no. 2 head style, between 0.456 inches and 0.508 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS4604U27 for national stock number 5305011975323.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5323.
-
MPN or Model
NAS4604U27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 2.043 inches and 2.073 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas4600 professional/industrial association standard
More from these suppliers
- 5940-01-614-7617 MPN NAS1063C10-210KTerminal Board Marker Strip
- 5305-00-003-6823 MPN NAS6002U24Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-225-9443 MPN MS16996-32Socket Head Cap Screw
- 5305-00-253-5623 MPN MS21318-42Drive Screw
- 5305-00-340-4855 MPN NAS623-5-22Machine Screw
- 5305-00-472-3881 MPN NAS1351C4-8Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5323 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604U27 | National Aerospace Standards |