NSN 5305-01-197-5335
High Torque Screw
Between 2.058 inches and 2.088 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS5103U28 for national stock number 5305011975335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5335.
-
MPN or Model
NAS5103U28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 2.058 inches and 2.088 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas5103 professional/industrial association standard
More from these suppliers
- 5940-00-899-2182 MPN NAS705T1Stud Terminal
- 5305-00-007-0281 MPN NAS1100C08-8PMachine Screw
- 5305-00-007-3012 MPN AN565BC1032H10Setscrew
- 5305-00-021-3918 MPN MS35308-355Hexagon Head Cap Screw
- 5305-00-150-3268 MPN MS24673-20Socket Head Cap Screw
- 5305-00-151-0011 MPN NASM24693-302Machine Screw
- 5305-00-205-3674 MPN NAS1189CE06P4Socket Head Cap Screw
- 5305-00-206-3683 MPN NAS517-5-15Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5103U28 | National Aerospace Standards |