NSN 5305-01-197-5337
High Torque Screw
Between 0.620 inches and 0.650 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS5103U5 for national stock number 5305011975337.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5337.
-
MPN or Model
NAS5103U5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.620 inches and 0.650 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas5103 professional/industrial association standard
More from these suppliers
- 5940-01-413-3010 MPN NAS1063B249-258Terminal Board Marker Strip
- 5940-01-425-6520 MPN NAS1063A15-327Terminal Board Marker Strip
- 1680-01-563-6041 MPN NAS1714D2-16SWAircraft Loop Clamp
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-007-3025 MPN NAS1102E04-6BMachine Screw
- 5305-00-044-4153 MPN MS90725-109Hexagon Head Cap Screw
- 5305-00-045-1781 MPN MS24694C274Machine Screw
- 5305-00-097-4484 MPN MS21125-0428Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5337 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5103U5 | National Aerospace Standards |