NSN 5305-01-197-5341
High Torque Screw
Between 0.480 inches and 0.510 inches fastener length, pan no. 2 head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS5104U2 for national stock number 5305011975341.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5341.
-
MPN or Model
NAS5104U2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.480 inches and 0.510 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas5104u2 professional/industrial association standard
More from these suppliers
- 5940-01-451-2671 MPN NAS1063E3-551RTerminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-033-7683 MPN NAS1352C06-20Socket Head Cap Screw
- 5305-00-061-0224 MPN NAS608C4H9Socket Head Cap Screw
- 5305-00-100-6588 MPN NAS1153-16Machine Screw
- 5305-00-144-0399 MPN MS35307-383Hexagon Head Cap Screw
- 5305-00-207-1728 MPN NAS1351C4-24Socket Head Cap Screw
- 5305-00-225-3851 MPN MS35203-60Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5341 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5104U2 | National Aerospace Standards |