NSN 5305-01-197-5930
High Torque Screw
Between 3.543 inches and 3.563 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS21130B450 for national stock number 5305011975930.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5930.
-
MPN or Model
MS21130B450
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 3.543 inches and 3.563 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 3.125 inches and 3.141 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c fastener and 47.0 rockwell c fastener -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.448 inches first hole and 3.468 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 632 fastener -
Material Specification
Ams 5629 assn standard single material response fastener -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-069-2417 MPN NAS1744-2Conductor Splice
- 5305-00-007-9893 MPN NAS1102E04-13Machine Screw
- 5305-00-008-7878 MPN NAS1190E02T10LSocket Head Cap Screw
- 5305-00-054-9229 MPN MS24694C117Machine Screw
- 5305-00-059-3665 MPN NAS1635-3-24Machine Screw
- 5305-00-068-5393 MPN MS24667-4Socket Head Cap Screw
- 5305-00-127-7941 MPN NAS1624-4Machine Screw
- 5305-00-150-9265 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5930 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21130B450 | National Aerospace Standards |
MS21130B450 | Military Standards |