NSN 5305-01-197-5932
High Torque Screw
Between 2.103 inches and 2.123 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS21130B526 for national stock number 5305011975932.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5932.
-
MPN or Model
MS21130B526
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 2.103 inches and 2.123 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.625 inches and 1.641 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c fastener and 47.0 rockwell c fastener -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.990 inches first hole and 2.010 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 632 fastener -
Material Specification
Ams 5629 assn standard single material response fastener -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-207-0227 MPN NAS1745-20Conductor Splice
- 5305-00-001-4017 MPN NAS1352-3LE8PSocket Head Cap Screw
- 5305-00-008-5908 MPN NAS1189E04T4BSocket Head Cap Screw
- 5305-00-057-0492 MPN MS24694-S6Machine Screw
- 5305-00-066-7369 MPN MS24693-C12Machine Screw
- 5305-00-068-8431 MPN MS16996-13Socket Head Cap Screw
- 5305-00-074-2699 MPN NAS1156-17Machine Screw
- 5305-00-079-7969 MPN MS24694S218Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5932 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21130B526 | National Aerospace Standards |
MS21130B526 | Military Standards |