NSN 5305-01-197-5935
High Torque Screw
Between 0.747 inches and 0.767 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS21130B306 for national stock number 5305011975935.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5935.
-
MPN or Model
MS21130B306
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.263 inches and 0.313 inches -
Fastener Length
Between 0.747 inches and 0.767 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.375 inches and 0.390 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c fastener and 47.0 rockwell c fastener -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.658 inches first hole and 0.678 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material Specification
Ams 5629 assn standard single material response fastener -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5882 MPN NAS1101E04-4PMachine Screw
- 5305-00-052-7433 MPN MS35198-101Machine Screw
- 5305-00-058-9369 MPN MS51977-31Setscrew
- 5305-00-063-3507 MPN MS24693-S274Machine Screw
- 5305-00-104-5076 MPN NAS1352-5LE56PSocket Head Cap Screw
- 5305-00-211-9411 MPN NAS1205-32DClose Tolerance Screw
- 5305-00-225-9445 MPN MS16996-34Socket Head Cap Screw
- 5305-00-239-7787 MPN NAS1096-1-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5935 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21130B306 | National Aerospace Standards |
MS21130B306 | Military Standards |