NSN 5305-01-197-5939
High Torque Screw
Between 1.497 inches and 1.517 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS21130B318 for national stock number 5305011975939.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-5939.
-
MPN or Model
MS21130B318
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 1.497 inches and 1.517 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.125 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c fastener and 47.0 rockwell c fastener -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.408 inches first hole and 1.428 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 632 fastener -
Material Specification
Ams 5629 assn standard single material response fastener -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-143-0687 MPN NAS1389-10Conductor Splice
- 5305-00-057-0594 MPN NAS1102C04-7Machine Screw
- 5305-00-059-3086 MPN MS24694-S103Machine Screw
- 5305-00-068-0502 MPN MS90725-6Hexagon Head Cap Screw
- 5305-00-150-9209 MPN MILS7839Machine Screw
- 5305-00-206-3650 MPN NAS517-6-14Machine Screw
- 5305-00-269-4207 MPN MS24694S149Machine Screw
- 5305-00-282-8788 MPN NAS229-19Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-5939 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21130B318 | National Aerospace Standards |
MS21130B318 | Military Standards |