NSN 5305-01-197-6515
High Torque Screw
Internal drive ribbed.
Manufacturer part number SC1786R-3-9D for national stock number 5305011976515.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6515.
-
MPN or Model
SC1786R-3-9D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.760 inches first hole and 0.800 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-177-5688 MPN CVC241-3-14Machine Screw
- 5305-00-459-9865 MPN AIC792-4-15Close Tolerance Screw
- 5305-00-478-0475 MPN 756432-1Machine Screw
- 5305-01-101-0723 MPN AIC811-00-2Socket Head Cap Screw
- 5305-01-108-8370 MPN NAS1101E3-16Machine Screw
- 5305-01-133-1067 MPN HT4028L5-6Close Tolerance Screw
- 5305-01-173-3599 MPN LD111-0044-2409Close Tolerance Screw
- 5305-01-261-1898 MPN 51B334-10YClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6515 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1786R-3-9D | Arconic Global Fasteners & Rings, |
PBF1381-6309 | Sps Technologies, Llc |
123179A3R9D | Sps Technologies, Llc |
A175-6309 | Huck International, Inc. |
LE111-0035-6309 | Boeing Company, The |
LE111-0035-6309 | Sps Technologies, Llc |
LE111-0035-6309 | Sps Technologies, Llc |
LE111-0035-6309 | Sonic Industries Inc. |
A175-6309 | Huck Intl Inc |