NSN 5305-01-197-6567
Panel Screw
5.100 inches fastener length, flat chamfer head style, between 0.218 inches and 0.226 inches head diameter, head height: between 0.134 inches and 0.138 inches .
Manufacturer part number 159266-01 for national stock number 5305011976567.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-197-6567.
-
MPN or Model
159266-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
5.100 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.218 inches and 0.226 inches -
Head Height
Between 0.134 inches and 0.138 inches -
Shank Unthreaded Hole Diameter
0.060 inches first hole and 0.065 inches first hole -
First Diameter From Head
Between 0.1045 inches and 0.1075 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.018 inches and 0.020 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.138 inches -
Width Across Flats
Between 0.109 inches and 0.111 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.000 inches first hole -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
Qq-s-764 cond a federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-043-0384 MPN 739253-01Power Transformer
- 5905-00-428-7487 MPN 744221-09Wire Wound Fixed Resistor
- 5945-00-810-9075 MPN 995993-03Thermal Relay
- 5935-01-248-7109 MPN 160557-08Electrical Receptacle Connector
- 5930-01-260-5272 MPN 737102-81Rotary Switch
- 1680-01-585-5328 MPN 185019-001Flight Management C
- 5950-01-423-7909 MPN 702923-05Power Transformer
- 5935-01-023-1435 MPN 147380-03Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-197-6567 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
159266-01 | Ge Aviation Systems Llc |