NSN 5305-01-197-6604
High Torque Screw
Internal drive ribbed.
Manufacturer part number SFH22-4A21 for national stock number 5305011976604.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6604.
-
MPN or Model
SFH22-4A21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 1.708 inches and 1.755 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837, type 2 cl 3 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-079-9228 MPN 71766-23X2PC7L1Valve Stem
- 4820-00-472-4702 MPN 2620-926X14ASSYBAL1Ball Valve
- 4820-00-915-1434 MPN B6-375B-5TSL1Angle Valve
- 4820-01-060-3519 MPN 803-2177525-M5XX-35L1Fluid Valve Stem
- 4820-01-089-1779 MPN 4678426-0005Fluid Valve Stem
- 4820-01-104-3957 MPN MIL-V-1189 TYPE1 CLASS4 32INCHGate Valve
- 4820-01-108-1913 MPN 412-4638328 PIECE 47L1Knife Assembly
- 4820-01-125-2198 MPN D2440 PC 7L1Fluid Valve Stem
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6604 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFH22-4A21 | Sps Technologies, Llc |
HT8181F4-21 | Alcoa Global Fasteners, Inc. |
SC17794-21 | Arconic Global Fasteners & Rings, |
PBF1202-4-21 | Sps Technologies, Llc |
HR204-4-21 | Hi-shear Corporation |
106706T-4-21 | Sps Technologies, Llc |
HR204-4-21 | Lisi Aerospace Canada Corp |
GB510CE4-21 | Northrop Grumman Systems Corporation |
HR204-4-21 | Naval Inventory Control Point |
106706T-4-21 | Sps Technologies, Llc |