NSN 5305-01-197-6607
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1581F4R8 for national stock number 5305011976607.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6607.
-
MPN or Model
NAS1581F4R8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.888 inches and 0.918 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5305-00-003-6769 MPN MS24627-64Tapping Screw
- 5305-00-021-3668 MPN MS35307-310Hexagon Head Cap Screw
- 5305-00-081-6668 MPN NASM24693-S2Machine Screw
- 5305-00-107-9074 MPN NAS1102-3-5BMachine Screw
- 5305-00-143-1508 MPN NAS662C1-5Machine Screw
- 5305-00-145-0820 MPN NAS1351C04-10Socket Head Cap Screw
- 5305-00-150-3150 MPN NASM565CC4-3Setscrew
- 5305-00-205-3844 MPN NAS1218-3-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6607 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F4R8 | National Aerospace Standards |
NAS1581A4R8 | National Aerospace Standards |