NSN 5305-01-197-6610
High Torque Screw
Internal drive ribbed.
Manufacturer part number SFH22-3-4 for national stock number 5305011976610.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6610.
-
MPN or Model
SFH22-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.308 inches and 0.375 inches -
Fastener Length
Between 0.568 inches and 0.615 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837, type 2 cl 3 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-596-2584 MPN HT4025L4D19Close Tolerance Screw
- 5305-01-027-4664 MPN HT4020-5-9AClose Tolerance Screw
- 5305-01-056-2952 MPN BACB30LU3-15Close Tolerance Screw
- 5305-01-084-4687 MPN HT4010-8-7Shoulder Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-158-6253 MPN HT4054-4-12Close Tolerance Screw
- 5305-01-227-3447 MPN HT4024L4D4-1Close Tolerance Screw
- 5305-01-303-6352 MPN SC1823-3-6PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6610 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFH22-3-4 | Sps Technologies, Llc |
SHF22-3A4 | Sps Technologies, Llc |
106706T-3-A4 | Sps Technologies, Llc |
HT8181F3-4 | Alcoa Global Fasteners, Inc. |
SC1779-3-4 | Arconic Global Fasteners & Rings, |
PBF1202-3-4 | Sps Technologies, Llc |
HR204-3-4 | Hi-shear Corporation |
106706T-3-4 | Sps Technologies, Llc |
HR204-3-4 | Lisi Aerospace Canada Corp |
GB510CE3-4 | Northrop Grumman Systems Corporation |