NSN 5305-01-197-6821
High Torque Screw
Between 0.855 inches and 0.885 inches fastener length, pan no. 2 head style, between 0.456 inches and 0.508 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS4604U8 for national stock number 5305011976821.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6821.
-
MPN or Model
NAS4604U8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.855 inches and 0.885 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.456 inches and 0.508 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas4600 professional/industrial association standard
More from these suppliers
- 5940-00-923-4493 MPN NAS1745-4Conductor Splice
- 5305-00-031-1042 MPN MS24693-2BMachine Screw
- 5305-00-052-1560 MPN AN525D8R10Socket Head Cap Screw
- 5305-00-057-0511 MPN MS51958-14Machine Screw
- 5305-00-071-6614 MPN NAS1191E4P7LSocket Head Cap Screw
- 5305-00-079-5834 MPN NAS514-832-14Machine Screw
- 5305-00-093-6688 MPN MS21125-0534Close Tolerance Screw
- 5305-00-186-5089 MPN NAS560HK5-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6821 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604U8 | National Aerospace Standards |
NAS4604U8 | National Aerospace Standards |