NSN 5305-01-197-6822
High Torque Screw
Between 1.611 inches and 1.646 inches fastener length, pan no. 2 head style, between 0.575 inches and 0.635 inches head diameter, head height: 0.138 inches .
Manufacturer part number NAS4605U19 for national stock number 5305011976822.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6822.
-
MPN or Model
NAS4605U19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.611 inches and 1.646 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.575 inches and 0.635 inches -
Head Height
0.138 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.312 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas4600 professional/industrial association standard
More from these suppliers
- 5940-01-451-2666 MPN NAS1063A10-105BQTerminal Board Marker Strip
- 5940-01-615-1073 MPN NAS1063Terminal Board Marker Strip
- 5940-01-615-1074 MPN NAS1063Terminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-008-5881 MPN NAS1101E003Machine Screw
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-038-9411 MPN NAS1184-17Close Tolerance Screw
- 5305-00-071-2221 MPN MS35199-52Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6822 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4605U19 | National Aerospace Standards |
NAS4605U19 | National Aerospace Standards |