NSN 5305-01-197-6824
High Torque Screw
Between 0.370 inches and 0.400 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS5003-1 for national stock number 5305011976824.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6824.
-
MPN or Model
NAS5003-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.370 inches and 0.400 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas5003 professional/industrial association standard
More from these suppliers
- 5930-00-839-3928 MPN NAS1072-1Switch Guard
- 5940-01-527-1122 MPN NAS1063Terminal Board Marker Strip
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-052-7407 MPN MS24627-14Tapping Screw
- 5305-00-057-0539 MPN NASM51958Machine Screw
- 5305-00-114-1977 MPN NASM27039-5-11Machine Screw
- 5305-00-151-2032 MPN MILS7839Machine Screw
- 5305-00-292-7792 MPN AN565A5H4Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6824 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5003-1 | National Aerospace Standards |
NAS5003-1 | National Aerospace Standards |