NSN 5305-01-197-6825
High Torque Screw
Between 0.933 inches and 0.963 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS5003-10 for national stock number 5305011976825.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-197-6825.
-
MPN or Model
NAS5003-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.933 inches and 0.963 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas5003 professional/industrial association standard
More from these suppliers
- 5305-00-008-3700 MPN NAS1191E04P6LSocket Head Cap Screw
- 5305-00-051-2324 MPN MS51958-92Machine Screw
- 5305-00-058-9383 MPN MS51977-55Setscrew
- 5305-00-085-4056 MPN MS3212-39Machine Screw
- 5305-00-150-3585 MPN NAS583-94Close Tolerance Screw
- 5305-00-177-5601 MPN NAS1352-04-6Socket Head Cap Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-419-0820 MPN MS16996-10BSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-197-6825 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5003-10 | National Aerospace Standards |
NAS5003-10 | National Aerospace Standards |