NSN 5305-01-198-3482
High Torque Screw
Between 1.239 inches and 1.269 inches fastener length, flat chamfer head style, between 0.365 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS1124E15 for national stock number 5305011983482.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-198-3482.
-
MPN or Model
NAS1124E15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.239 inches and 1.269 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1124 professional/industrial association standard
More from these suppliers
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5935-01-660-8063 MPN ES931VTElectrical Receptacle Connector
- 5305-00-004-5326 MPN NAS720-6-4Assembled Washer Screw
- 5305-00-052-4047 MPN MS3212-51Machine Screw
- 5305-00-053-8965 MPN MS90726-167Hexagon Head Cap Screw
- 5305-00-054-6671 MPN MS51957-46Machine Screw
- 5305-00-057-0480 MPN MS24694C115Machine Screw
- 5305-00-057-0496 MPN MS24694S12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-198-3482 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1124E15 | National Aerospace Standards |