NSN 5305-01-199-1335
High Torque Screw
Between 0.818 inches and 0.865 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number GB510BC3-8 for national stock number 5305011991335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-199-1335.
-
MPN or Model
GB510BC3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.308 inches and 0.375 inches -
Fastener Length
Between 0.818 inches and 0.865 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 ty2 cl2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-015-6642 MPN S5008-4-4Close Tolerance Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-062-3349 MPN BACB30RF6P46Close Tolerance Screw
- 5305-01-076-4931 MPN HT4020-5-10AXShoulder Screw
- 5305-01-141-7908 MPN HT4020-6-16AXShoulder Screw
- 5305-01-178-9308 MPN HT4027-3-5Close Tolerance Screw
- 5305-01-193-2381 MPN SC1777A08-8Close Tolerance Screw
- 5305-01-209-9334 MPN 433913-40Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-199-1335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510BC3-8 | Northrop Grumman Systems Corporation |
106706H3-8 | Sps Technologies, Llc |
SCD1779-3-8 | Arconic Global Fasteners & Rings, |
PBF1202-3-8 | Sps Technologies, Llc |
HR204JK-3-8 | Hi-shear Corporation |
106706T-3-8 | Sps Technologies, Llc |
HR204JK-3-8 | Lisi Aerospace Canada Corp |
GB510CE3-8 | Northrop Grumman Systems Corporation |
GB510N3A8 | Northrop Grumman Systems Corporation |
SFH22-3A8 | Sps Technologies, Llc |
1202-3-8 | Sps Technologies, Llc |
SC1779-3-8 | Arconic Global Fasteners & Rings, |
1067061-3-8 | Sps Technologies, Llc |
HR204-3-8 | Hi-shear Corporation |
SFH22-3A8 | Sps Technologies Inc |