NSN 5305-01-199-6487
High Torque Screw
19.00 millimeters fastener length, flat countersunk head style, 10.0 millimeters head diameter, grip diameter: between 4.9650 millimeters and 4.9900 millimeters .
Manufacturer part number NA0038-050010 for national stock number 5305011996487.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-199-6487.
-
MPN or Model
NA0038-050010
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
9.0 millimeters -
Fastener Length
19.00 millimeters -
Head Style
Flat countersunk -
Head Diameter
10.0 millimeters -
Grip Diameter
Between 4.9650 millimeters and 4.9900 millimeters -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
5.0 millimeters -
Grip Length
10.00 millimeters -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
0.8 -
External Thread Tolerance Class
4h6h -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Mj -
Specification Data
80205-na0038 professional/industrial association standard
More from these suppliers
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-005-0657 MPN NAS1154E21Close Tolerance Screw
- 5305-00-046-9800 MPN NAS514P1032-13PMachine Screw
- 5305-00-052-8905 MPN MS24630-59Tapping Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-139-6754 MPN MS3213-7Machine Screw
- 5305-00-141-6282 MPN NAS1191E04P18LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-199-6487 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0038-050010 | National Aerospace Standards |