NSN 5305-01-199-6502
High Torque Screw
Between 0.683 inches and 0.713 inches fastener length, pan no. 2 head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS5102U6 for national stock number 5305011996502.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-199-6502.
-
MPN or Model
NAS5102U6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.683 inches and 0.713 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.164 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjc -
Specification Data
80205-nas5102 professional/industrial association standard
More from these suppliers
- 5940-01-362-5270 MPN NAS1063C12-4Terminal Board Marker Strip
- 5935-01-421-0966 MPN NAS1834-08-550Electrical Connector Insert
- 5940-01-660-0092 MPN NAS1063A2-536GTerminal Board Marker Strip
- 5305-00-001-4017 MPN NAS1352-3LE8PSocket Head Cap Screw
- 5305-00-099-7659 MPN NAS1221-08E3Machine Screw
- 5305-00-104-2813 MPN NAS1352-8LE36PSocket Head Cap Screw
- 5305-00-141-6407 MPN NAS1191E02P5Socket Head Cap Screw
- 5305-00-180-4841 MPN NAS1101E08H10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-199-6502 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5102U6 | National Aerospace Standards |