NSN 5305-01-200-4899
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, pan no. 2 head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.074 inches and 0.086 inches .
Manufacturer part number NAS5101U8 for national stock number 5305012004899.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-200-4899.
-
MPN or Model
NAS5101U8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.074 inches and 0.086 inches -
Grip Diameter
Between 0.1370 inches and 0.1375 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.138 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjc -
Specification Data
80205-nas5101 professional/industrial association standard
More from these suppliers
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5940-01-612-8083 MPN NAS1063-C3-291ATerminal Board Marker Strip
- 5305-00-012-8232 MPN NAS388-10-18PMachine Screw
- 5305-00-023-5867 MPN NAS602-2Machine Screw
- 5305-00-074-4130 MPN NAS1156-18Machine Screw
- 5305-00-086-6993 MPN MS27039-5-14Machine Screw
- 5305-00-088-9491 MPN AN565B428H7Setscrew
- 5305-00-105-9426 MPN NAS1352C6LN20Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-200-4899 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5101U8 | National Aerospace Standards |