NSN 5305-01-200-7730
Panel Screw
1.270 inches fastener length, hexagon head style, 0.210 inches head height, width between flats: 0.563 inches .
Manufacturer part number 12312414 for national stock number 5305012007730.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-200-7730.
-
MPN or Model
12312414
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
1.270 inches -
Head Style
Hexagon -
Head Height
0.210 inches -
Width Between Flats
0.563 inches -
First Diameter From Head
0.262 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.520 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Hardness Rating
33.0 rockwell c and 39.0 rockwell c -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 4140 or steel comp 8640 -
Material Specification
Astm-a322 assn standard 1st material response or astm-a331 assn standard 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-111-6748 MPN 8201329Push Button
- 5930-01-077-8973 MPN 12288593Push Button
- 5975-01-152-2910 MPN 12270966Cable Spacer
- 5975-01-175-3327 MPN 9290906Conduit Outlet Cover
- 5935-01-231-1952 MPN 9360888Electrical Receptacle Connector Body
- 5935-01-259-9129 MPN 9384992-2Receptacle Dummy Connector
- 5935-01-501-2297 MPN 12992444Electrical Connector End Seal Plug
- 5905-00-826-8902 MPN 10554949-1Precision Wire Wound Variable Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-200-7730 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |
12312414 | Us Army Ardec Rdecom |