NSN 5305-01-201-4848
Panel Screw
0.382 inches fastener length, flat chamfer head style, 0.375 inches head diameter, head height: 0.125 inches .
Manufacturer part number 13038971 for national stock number 5305012014848.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-201-4848.
-
MPN or Model
13038971
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.304 inches and 0.307 inches -
Fastener Length
0.382 inches -
Head Style
Flat chamfer -
Head Diameter
0.375 inches -
Head Height
0.125 inches -
First Diameter From Head
0.188 inches -
Second Diameter From Head
Between 0.071 inches and 0.074 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.070 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 0.075 inches and 0.078 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Askewed Head Angle
45.0 degrees -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 303 -
Material Specification
Astm a-582 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-std-171 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-01-159-7610 MPN 11462788Thermostatic Switch
- 5985-01-200-9617 MPN 13038580Waveguide Assembly
- 5935-00-073-5331 MPN 10110092Connector Adapter
- 5905-00-088-1498 MPN 9157383Inductive Wire Wound Fixed Resistor
- 5950-00-088-5750 MPN 9992883Power Transformer
- 5940-00-159-0227 MPN 9187783Stud Terminal
- 5935-00-196-0697 MPN 10219836-4Connector Strip
- 5935-00-201-7365 MPN 8027567Tip Jack
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-201-4848 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
13038971 | U S Army Aviation And Missile |
13038971 | Raytheon Company |
Stock Check
- NE: 7
- NS: 3