NSN 5305-01-203-1661
High Torque Screw
Between 0.730 inches and 0.760 inches fastener length, pan no. 2 head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS5104U6 for national stock number 5305012031661.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-203-1661.
-
MPN or Model
NAS5104U6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.730 inches and 0.760 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 3140 -
Thread Series Designator
Unjf -
Specification Data
80205-nas5104 professional/industrial association standard
More from these suppliers
- 5935-01-218-3818 MPN NAS1692G10T5P6Electrical Receptacle Connector
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-052-3618 MPN NAS1633E3Machine Screw
- 5305-00-063-2322 MPN NAS1635-08-30Machine Screw
- 5305-00-068-5398 MPN NAS608HC3-6Socket Head Cap Screw
- 5305-00-089-0269 MPN NAS608-440-6PSocket Head Cap Screw
- 5305-00-115-9358 MPN NAS514P440-9PMachine Screw
- 5305-00-144-8855 MPN MS21262-24Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-203-1661 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5104U6 | National Aerospace Standards |