NSN 5305-01-203-2293
High Torque Screw
Between 2.204 inches and 2.234 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number NAS1580V6T26 for national stock number 5305012032293.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-203-2293.
-
MPN or Model
NAS1580V6T26
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.569 inches and 0.619 inches -
Fastener Length
Between 2.204 inches and 2.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-451-2685 MPN NAS1063E3-551WTerminal Board Marker Strip
- 4920-01-571-0094 MPN NAS1212R20JK68 Strap Assembly-tie
- 5940-01-381-7166 MPN NAS1063B204-215Terminal Board Marker Strip
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-051-7325 MPN NAS1352-3H32Socket Head Cap Screw
- 5305-00-054-9237 MPN MS24694C125Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-203-2293 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V6T26 | National Aerospace Standards |