NSN 5305-01-205-9170
High Torque Screw
Furnished with retaining ring,17-4ph per ams 5643 or 17-7ph per ams 5673,passivate per qq-p-35.
Manufacturer part number ST3M736-4-9 for national stock number 5305012059170.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-205-9170.
-
MPN or Model
ST3M736-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.283 inches and 0.334 inches -
Fastener Length
Between 0.981 inches and 1.001 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.562 inches and 0.578 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.881 inches first hole and 0.911 inches first hole -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-143-0486 MPN 53G-9707005-3Special Bushing
- 4920-00-152-6651 MPN CD24B1524-1Pneumatic System Components Test Set
- 1560-00-175-3969 MPN 53-07504-3Aircraft Structure Assembly
- 5985-00-180-4808 MPN 32-87850-79Waveguide Assembly
- 1560-00-196-9556 MPN 32-15010-4Aircraft Structural Plate
- 4920-00-216-9279 MPN 68D390010-1001Control Cable Installing Tool
- 1560-00-225-5502 MPN 53-13003-1Speed Brake Arm Assembly
- 1560-00-238-4491 MPN 32-32257-10Bell Mouth Ring
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-205-9170 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M736-4-9 | Boeing Company, The |
121672-4-9 | Sps Technologies, Llc |