NSN 5305-01-210-0795
High Torque Screw
Between 0.704 inches and 0.734 inches fastener length, oval countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 3M963-4L4 for national stock number 5305012100795.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-210-0795.
-
MPN or Model
3M963-4L4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.704 inches and 0.734 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488, type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2586 MPN HST12AP5-5Materi Aircraft Pin
- 5305-00-068-5402 MPN AIC811-00-3Socket Head Cap Screw
- 5305-00-441-0162 MPN AIC82-7-68Close Tolerance Screw
- 5305-01-054-6234 MPN AIC9535-6-15Close Tolerance Screw
- 5305-01-109-1350 MPN AIC985-10-36PClose Tolerance Screw
- 5305-01-357-2407 MPN AIC4463-6-8Machine Screw
- 5305-01-381-1483 MPN AIC1701-3-15Close Tolerance Screw
- 5305-01-381-2125 MPN AIC1701-3-11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-210-0795 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M963-4L4 | Sps Technologies, Llc |
3M963-4L4 | Arconic Global Fasteners & Rings, |
3M963-4L4 | Abounding Security Inc |
3M963-4L4 | Sps Technologies, Llc |
3M963-4L4 | Boeing Company, The |
3M963-4L4 | Huck International, Inc. |
3M963-4L4 | Huck Intl Inc |