NSN 5305-01-211-0682
High Torque Screw
Between 2.142 inches and 2.172 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number BACB30LH3U29 for national stock number 5305012110682.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-211-0682.
-
MPN or Model
BACB30LH3U29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 2.142 inches and 2.172 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-206-7205 MPN BACS12CK3U18Machine Screw
- 5305-01-435-5757 MPN BACB30LU8-27Close Tolerance Screw
- 5305-01-435-7885 MPN BACB30LU9-29Close Tolerance Screw
- 5305-01-604-8543 MPN 3M1277E4D6ALMachine Screw
- 5306-00-110-6316 MPN 9662M67P01Machine Bolt
- 5306-00-111-1159 MPN 9651M85P03Machine Bolt
- 5306-00-479-5197 MPN VAL23602-4DS017Close Tolerance Bolt
- 5306-00-486-3025 MPN VAL23033-6H26Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-211-0682 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3U29 | The Boeing Company |
BACB30LH3U29 | Huck International, Inc. |
BACB30LH3U29 | Valley-todeco, Inc. |
BACB30LH3U29 | Sps Technologies, Llc |
BACB30LH3U29 | Arconic Global Fasteners & Rings, |
BACB30LH3U29 | Federal Manufacturing Corporation |
BACB30LH3U29 | Sps Technologies, Llc |
BACB30LH3U29 | Sps Technologies, Llc |
BACB30LH3U29 | Alcoa Global Fasteners, Inc. |
BACB30LH3U29 | Huck Intl Inc |