NSN 5305-01-212-4554
High Torque Screw
Between 1.261 inches and 1.291 inches fastener length, flat countersunk head style, between 0.280 inches and 0.327 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1152E16P for national stock number 5305012124554.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-212-4554.
-
MPN or Model
NAS1152E16P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.261 inches and 1.291 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.327 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type, 2class 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-00-754-8636 MPN NAS706S3Feedthru Terminal
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-007-1566 MPN NAS1743C4T10USocket Head Cap Screw
- 5305-00-052-5272 MPN MS24693-S286Machine Screw
- 5305-00-052-5915 MPN MS35198-59Machine Screw
- 5305-00-053-5162 MPN NAS1352C04-20Socket Head Cap Screw
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-142-3456 MPN NAS334CP22Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-212-4554 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152E16P | National Aerospace Standards |