NSN 5305-01-212-5212
High Torque Screw
Between 1.691 inches and 1.721 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS2804-20 for national stock number 5305012125212.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-212-5212.
-
MPN or Model
NAS2804-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.431 inches and 0.481 inches -
Fastener Length
Between 1.691 inches and 1.721 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2804 professional/industrial association standard
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-008-3700 MPN NAS1191E04P6LSocket Head Cap Screw
- 5305-00-008-7855 MPN NAS1100E04-22PMachine Screw
- 5305-00-099-7877 MPN NAS1351-5H16PSocket Head Cap Screw
- 5305-00-102-3013 MPN NAS1623-9DMachine Screw
- 5305-00-106-6272 MPN NAS1221-06-5PClose Tolerance Screw
- 5305-00-175-9056 MPN NAS1351C08-10Socket Head Cap Screw
- 5305-00-253-5616 MPN MS21318-22Drive Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-212-5212 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2804-20 | National Aerospace Standards |
Stock Check
- NS: 53
- NE: 221