NSN 5305-01-213-4828
High Torque Screw
Internal drive ribbed.
Manufacturer part number AS292-3-08 for national stock number 5305012134828.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-213-4828.
-
MPN or Model
AS292-3-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.356 inches and 0.392 inches -
Fastener Length
Between 0.872 inches and 0.892 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Locking Feature
Detent ball threads -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.500 inches and 0.516 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.070 inches and 0.080 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5985-00-022-2892 MPN GA810DD6Fixed Attenuator
- 1560-00-047-2064 MPN 89WM1479-1Aircraft Structural Component Fitting
- 1560-00-047-2106 MPN 89W1150-1Wing Outer Panel Cap Assy
- 1560-00-091-3163 MPN 89P1198-5Exhaust Clamp Assembly
- 4820-00-104-9624 MPN 105C906025-1Gate Valve
- 1560-00-148-8901 MPN A51B20203-12Aircraft Fairing
- 1560-00-165-7973 MPN 87650Aircraft Structural Component Support
- 5930-00-270-1706 MPN GS837DF1Sensitive Switch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-213-4828 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-3-08 | Avibank Mfg., Inc. |
GB510CG3-08 | Northrop Grumman Systems Corporation |