NSN 5305-01-215-1365
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number NAS1131E6 for national stock number 5305012151365.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-215-1365.
-
MPN or Model
NAS1131E6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1131 professional/industrial association standard
More from these suppliers
- 5940-01-057-4124 MPN NAS1389-3Conductor Splice
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-045-3182 MPN MS24694-S99Machine Screw
- 5305-00-051-6981 MPN MS27039DD4-28Machine Screw
- 5305-00-078-0178 MPN NAS1352-06LN12Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-116-1463 MPN NAS1205-18DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-215-1365 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |
NAS1131E6 | National Aerospace Standards |