NSN 5305-01-217-4008
High Torque Screw
3.130 inches fastener length, flat countersunk head style, between 0.469 inches and 0.477 inches head diameter, grip diameter: between 0.2470 inches and 0.2480 inches .
Manufacturer part number 302AS215 for national stock number 5305012174008.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-217-4008.
-
MPN or Model
302AS215
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
3.130 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.469 inches and 0.477 inches -
Grip Diameter
Between 0.2470 inches and 0.2480 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
2.630 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
44.0 rockwell c and 47.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-121-2271 MPN 0584C28390-2Pressure Switch
- 5905-00-243-0604 MPN 247ASC0489-004Inductive Wire Wound Fixed Resistor
- 5975-00-350-8141 MPN 13215888-02Electrical Tiedown Mounting Base
- 5985-00-495-1552 MPN 67A17D600Diplexer
- 4820-00-722-6523 MPN 58A164B18Pressure Relief Safety Head
- 5930-00-858-4255 MPN 68A75B399-1Push Button
- 5935-00-882-9989 MPN 247ASC0521-005Electrical Receptacle Connector
- 5935-00-950-1650 MPN 247ASC1664-001Connector Adapter
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-217-4008 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
302AS215 | Naval Air Systems Command |