NSN 5305-01-217-4009
High Torque Screw
Internal drive ribbed.
Manufacturer part number A175-2309 for national stock number 5305012174009.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-217-4009.
-
MPN or Model
A175-2309
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.324 inches and 0.354 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8735 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-2338 MPN 7S14-440-10AMachine Screw
- 5305-00-928-2348 MPN AIC79-4-10Machine Screw
- 5305-01-054-1639 MPN BACB30LK3-6Close Tolerance Screw
- 5305-01-129-4432 MPN SC2671-3-11Machine Screw
- 5305-01-211-7485 MPN AIC4040-3-02RClose Tolerance Screw
- 5305-01-357-5870 MPN AIC4463-3-38Machine Screw
- 5305-01-357-6952 MPN AIC1701-4-4Hexagon Head Cap Screw
- 5305-01-359-4724 MPN AIC4037-08-05RMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-217-4009 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A175-2309 | Huck International, Inc. |
AIC4040-3-09R | Sps Technologies, Llc |
LE111-0035-2309 | Boeing Company, The |
AIC4040-3-23R | Sps Technologies, Llc |
SC1786R-3-23 | Arconic Global Fasteners & Rings, |
PBF1381-2309 | Sps Technologies, Llc |
123179A3R23 | Sps Technologies, Llc |
A175-2309 | Huck Intl Inc |